How to remove air bubbles from screen protector

Update: 3/3/17 

If this is your first time for checking our blog , welcome! Please feel free to use our 5% OFF coupon code for your first order, it’s a limited time offer and only exclusive to our  blog reader !

Coupon code: Blog123

Limited time offer, code does not apply to OEM, on sale and some low price items.

Link: 123ink.ca

————————————————————————————
Screen protectors are commonly use for most of the mobile devices or pc equipments, it is especially designed for scratch prevention and it looks similar to a sticky film that enable you to place over the screen thus it must be transparent. Sometimes, people might noticing that there are air bubbles protruding from the screen after placing the screen protector, it is not only annoying but moreover visually distracting, if you are facing such issue, DO NOT PANIC! With a little patience and tips, your problem will be eventually solved once applying the following steps.

If you haven’t applied the screen protector yet:

1.    Power off your device and set it aside the new screen protector that you will be applying.
2.    Use a microfiber cloth or lay strips of scotch tape over your screen for removing dust on the screen.
3.    Apply your screen protector in the direction that were provided from the manual, the best way to do it is use your driver’s license or credit card to smooth out and push out the bubbles slowly that appear on the screen.

If you want to re-apply the screen protector:

1.    Power off the device.
2.    Use the edge of driver’s license or credit card to press out bubbles. Warning: Do not press too hard on the screen because it might cause inner damages. You could also simply heat the film with a blow dryer to make it softer but make sure no to overheat the film. Recommended in the direction starting from the centre toward the edges.
3.    If the bubble still not comes out, remove the film and put it in a rubbing alcohol solution that mixed with soap and water, re-apply again the above processes.
4.    Use the driver’s license or credit card to smooth down the newly applied film, wait for at least thirty minutes so the solution will be evaporated and you should be able to attach the protector without bubbles.

For more information regard to our products and services, pelase visit www.phonegala.com via web site or you can simply try our toll free number 1-866-979-746, We thank for your time and consideration for choosing us.