The short answer: pick the laminator by paper width and features, then match the pouch to the job. A 9-inch machine is listed for paper up to A4 (one model also lists letter); a 13-inch machine is listed for A3. For pouches, 3 mil is the standard thickness and stays flexible, 5 mil is listed as slightly thicker, and a sticky-back pouch turns a print into a sticker. The laminators and pouches in this guide, from Moustache, 123ink.ca’s own brand, run from $1.59 to $39.95 as of November 18, 2026.
Laminating protects menus, signs, recipe cards, ID cards and photos from spills and fingerprints. Two choices decide most purchases: the machine, and the thickness and type of pouch you feed it. This guide covers both, using the pages in our Laminators and Laminating Supplies categories, which are part of Office Machines.
Step 1: Choose the laminator
Start with the widest item you plan to laminate, then look at warm-up time, speed and extras.
- Hot and Cold Mode Thermal Laminator, 9-inch or 13-inch – $23.99 for the 9-inch and $32.99 for the 13-inch. The page lists hot and cold modes, a one-button control and a 3–5 minute warm-up. The 9-inch size is for paper up to A4 and the 13-inch for paper up to A3. The page gives a lamination speed of 9.84 in/min (25 cm/min), a maximum lamination thickness of 0.6 mm (0.023 in), and a continuous working time of 120 minutes on, 30 minutes cool down.
- 9-inch Hot and Cold Thermal Laminator with Anti-Jam, Corner Rounder and Paper Trimmer – $39.95. The page lists a 1.5–2 minute preheat, a speed of 400 mm/min, a two-roller system and an anti-jam release button. It takes paper up to 9 in wide, and the page says the total thickness of the laminated item should stay within 0.5 mm. A paper trimmer and a corner rounder (R=3 mm) come in the package, and the machine measures 14 in x 5.9 in x 2.6 in.
If you only laminate the occasional page, the simpler machine may be enough. If you also cut pages to size or want rounded corners, the second model includes both tools. Choose the 13-inch version of the first model only if you work with A3 sheets; the pouches in this guide are listed up to 9 in wide.
Hot vs cold lamination
Both machines above list a hot mode and a cold mode. Hot lamination needs the machine to warm up first. The page for the 9-inch model with the trimmer says cold lamination does not require preheating but needs cold laminating pouches. The pouches in this guide are thermal pouches, meant for hot lamination, so we do not list cold pouches here.
Step 2: 3 mil or 5 mil pouches
Mil is the unit the product pages use for pouch thickness. Here is what the pages say:
- Thermal Laminating Pouch, 3 mil, 50/pack – from $1.59 (4.3 x 6.3 in) to $6.89 (9 x 14.5 in). Sizes listed are 4.3 x 6.3 in at $1.59, 5.3 x 7.3 in at $1.99, 9 x 11.5 in (letter) at $5.69 and 9 x 14.5 in (legal) at $6.89. The page calls 3 mil the standard thickness and says items stay flexible after lamination, which suits home use and everyday projects. Gloss finish.
- Thermal Laminating Pouch, 5 mil, 50/pack – $6.99, letter size (9 x 11.5 in). The page describes 5 mil as slightly thicker than the 3 mil standard. Gloss finish.
In short: choose 3 mil for everyday papers, photos and anything you want to stay flexible, and 5 mil if you want a slightly thicker pouch for a letter-size sheet. Both come 50 to a pack, so a letter-size pack of 3 mil is $5.69 and the 5 mil pack is $6.99 on the pages at the time of writing. Check that your laminator lists the pouch thickness you plan to use. The 9-inch model with the trimmer recommends 3 mil to 5 mil pouches.
Step 3: Standard pouch or sticky-back pouch
Permanent Adhesive Sticky-Back Thermal Laminating Pouches, 50 sheets, are $3.59 in the 4.3 x 6.3 in photo size and $18.99 in letter size (9 x 11.5 in). They are 3 mil thermal pouches with an adhesive back covered by a release liner. You run them through your laminator as usual, let the pouch cool, peel the liner and press the laminated print onto a flat, dry surface. The page lists glass, ceramic, wood and stone as examples, and says they are compatible with most thermal laminators. Use them for labels, signs and stickers; use the standard pouches when you want a loose, laminated sheet.
Which combination fits?
- Recipe cards, menus and kids’ school work: a 9-inch laminator with 3 mil letter-size pouches.
- Photos and small cards: 3 mil pouches in the 4.3 x 6.3 in or 5.3 x 7.3 in size.
- Something you will handle often: 5 mil letter-size pouches, which the pouch page describes as slightly thicker.
- Permanent wall signs and labels: sticky-back pouches.
- A3 posters: the 13-inch machine, after checking the pouch sizes you need.
Prices are as of November 18, 2026. Check each product page for current price and availability, and browse laminating supplies for more sizes.
FAQ
What size laminator do I need?
Match it to your widest page. The 9-inch machines are listed for paper up to A4 (the trimmer model also lists letter), and the 13-inch machine for A3.
How long does a laminator take to warm up?
The page for the hot-and-cold 9-inch and 13-inch model lists 3–5 minutes. The 9-inch model with the trimmer lists a 1.5–2 minute preheat.
What is the difference between 3 mil and 5 mil?
Mil is the pouch thickness. On our pages, 3 mil is the standard thickness, and 5 mil is slightly thicker and listed in letter size.
Can I laminate photos?
The 3 mil and 5 mil pouch pages describe them as photo safe. Lamination is permanent, so for a one-of-a-kind photo, laminate a copy rather than the original.
Prices as of November 18, 2026. Check each product page for the current price, availability and specifications.



Comments 1